West Jordan Foundation Pros
Sidewalk Lifting in Salt Lake City, UT
Sidewalk lifting in Salt Lake City: polyurethane foam injection corrects trip hazards at uneven slab joints, free estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving West Jordan and nearby communities.
Sidewalk lifting corrects uneven slab joints where one panel has settled lower than the next, creating a trip hazard rather than just a cosmetic issue. Polyurethane foam injection raises the low panel to match its neighbor, closing the height gap without replacing the concrete.
Freeze-thaw cycles along the Wasatch Front shift soil beneath individual sidewalk panels at different rates, so one panel can settle while the one next to it stays put. West Jordan Foundation Pros measures the height difference at each joint before injecting, since matching adjacent panels precisely is what actually removes the trip hazard.
What's included
What's included with Sidewalk Lifting
Typically included: sidewalk inspection, access hole drilling, foam injection, height matching between panels, hole patching.
Optional: joint sealant resealing between panels.
Customer prep: keep the walkway clear of planters, hoses, or stored items along the affected panels.
Want a clearer scope?
Get a Free EstimateHow it works
How our Sidewalk Lifting process works
Step 1Sidewalk Inspection
Trip hazards and uneven slabs are identified along the walkway.
Step 2Access Hole Drilling
Small entry points are drilled into the affected slab sections.
Step 3Foam Injection
Material is injected to raise the sidewalk to a safe level.
Step 4Height Matching
Adjacent slabs are aligned to eliminate tripping hazards.
Step 5Hole Patching
Access points are sealed to restore a smooth surface.
Step 6Final Safety Check
The sidewalk is reviewed to confirm proper alignment and safety.
Materials
Materials and methods for Sidewalk Lifting
Polyurethane Foam
Raises sidewalk slabs quickly with minimal curing time, letting the walkway reopen the same day.
Patch Mix
Fills access holes to restore a flush surface finish at each injection point.
Joint Sealant
Reseals joints between slabs after lifting is complete to keep debris and water out.
Surface Protectant
Helps guard repaired areas from weather exposure.
Alignment Gauge
Used to measure slab height differences during the process.
Bonding Primer
Improves patch material adhesion to original concrete.
Questions on materials?
Get a Free EstimateTimeline
How long does a Sidewalk Lifting take?
Sidewalk lifts are usually one of the quicker jobs on the list, often done in a single short visit.
- 01
Sidewalk inspection
same day - 02
Access drilling and foam injection
1–2 hoursper panel
- 03
Height matching check
same visit
- 04
Hole patching
same visit
- 05
Walkable again
within a couple hours of curing
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permits and codes for Sidewalk Lifting
Check with Salt Lake County or your city if any part of the sidewalk sits on public property, since municipal sidewalks often have their own permit process.
| Typically needs a permit | Often no permit |
|---|---|
| Sidewalk work on a public walkway or city-owned right-of-way | Private residential sidewalk sections with no city-owned portion involved |
| — | Polyurethane foam injection and leveling with no structural modification |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs hiring a pro for Sidewalk Lifting
| DIY | Hire a pro |
|---|---|
| Sweeping debris out of panel joints to reduce further trip risk temporarily | Matching panel height precisely, since even a small miss still leaves a trip edge |
| Flagging a raised or sunken panel for repair before someone gets hurt | Injecting foam without cracking an already-thin or aged slab panel |
| — | Handling any permit requirements if the walkway is on city-owned property |
Not sure DIY vs pro?
Get a Free EstimateCost
What does a Sidewalk Lifting cost in Salt Lake City?
Pricing depends on how many panels need lifting and whether the walkway is public or private.
| Project type | Typical range | What’s included |
|---|---|---|
| Single panel lift | $250-$500, | one uneven joint corrected. |
| Multi-panel walkway lift | $500-$1,200, | several panels along a longer walkway. |
| Full front walkway releveling | $1,200-$2,500, | extensive unevenness across most panels. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateNext step
Request a free estimate for an exact panel count and height measurements.
When to call
When to call for Sidewalk Lifting
Call before someone trips on it, especially if the sidewalk is used by visitors or delivery workers regularly.
- A raised or sunken panel creating a visible step at the joint
- A walkway edge that's become a known trip hazard for visitors or mail carriers
- Panels sinking further each year along the same section
- Liability concern from an uneven public-facing walkway
Seeing warning signs?
Get a Free EstimateBefore & after
Before and after Sidewalk Lifting
Before 
After
FAQs
Sidewalk Lifting FAQs
Is foam concrete lifting cheaper than tearing out and replacing a sidewalk panel?
Yes. Polyurethane foam injection typically costs a fraction of removing and repouring a panel, and it finishes in hours instead of days.
How long does sidewalk lifting take?
Most panel lifts complete within one to two hours per panel, including drilling, injection, and patching. The walkway is usually usable again within a couple hours.
Do I need a permit for sidewalk lifting?
If the sidewalk is on public or city-owned property, yes, typically. Private residential walkways usually don't require one since no structural change occurs.
Can I fix an uneven sidewalk panel myself?
It's not recommended. Matching panel height precisely to remove the trip hazard takes measuring equipment and controlled injection a DIY foam kit doesn't offer.
Why does one sidewalk panel sink while the one next to it stays level?
Soil compacts at different rates beneath individual panels, especially after repeated freeze-thaw cycles, so neighboring panels can end up at different heights even though they were poured level originally.
Will the lifted panel sink again?
The foam fills the void causing the original settling and adds minimal extra weight, so the fix typically holds through future freeze-thaw seasons.
What happens if I ignore an uneven sidewalk panel?
The height gap usually gets worse over time as the low panel continues settling, and it becomes more of a liability and trip risk the longer it's left unaddressed.
More services
Other Foundation Repair services
Foundation Repair
Foundation repair in Salt Lake City: crack injection, piering, and wall stabilization with free estimates.
Piering and Underpinning
Piering and underpinning in Salt Lake City: helical piers, push piers, and load transfer brackets to stop ongoing foundation settlement.
Wall Stabilization
Wall stabilization in Salt Lake City for bowing basement walls: steel anchors, carbon fiber straps, I-beams, and free estimates.
Ask about Sidewalk Lifting
Tell us about the project and how to reach you.